BeagleBoard.org BeagleY-AI
A Raspberry Pi sized AI board built on the TI AM67A vision processor, with 4 TOPS of AI acceleration, DSPs and Wi-Fi 6.
Specifications of the BeagleBoard.org BeagleY-AI:
- Processor: Texas Instruments AM67A, quad 64-bit Arm Cortex-A53 @ 1.4GHz, with GPU, DSP and vision/deep learning accelerators (4 TOPS)
- GPU: 50 GFlop
- RAM: 4GB LPDDR4 (x32)
- Wi-Fi/Bluetooth: BeagleMod BM3301, 802.11ax Wi-Fi 6, Bluetooth Low Energy 5.4
- USB: 4 x USB 3.0 Type-A (simultaneous 5Gbps operation), 1 x USB 2.0 Type-C (device mode)
- Ethernet: Gigabit, with PoE+ support (requires separate PoE HAT)
- Camera/display: 2 x 4-lane MIPI camera connectors (one muxed with DSI)
- Display output: 1 x HDMI, 1 x OLDI, 1 x MIPI DSI
- PCIe Gen3 x1 interface (requires separate M.2 HAT or other adapter)
- Real-time clock with external coin-cell battery support
- 40-pin expansion header
- Power button
- Power: 5V/3A DC via USB-C
- Raspberry Pi form factor (85 x 56 mm)
Official product page: docs.beagleboard.org/boards/beagley/ai/01-introduction.html
Manufacturer: BeagleBoard.org | CPU architecture: arm64
BeagleBoard.org BeagleY-AI from above
1200w (333KB) | 1920w (754KB) | original (7.4MB)
BeagleBoard.org BeagleY-AI from below
1200w (347KB) | 1920w (745KB) | original (4.7MB)