Radxa ROCK 4D
A Raspberry Pi sized Rockchip RK3576 board with LPDDR5, a 6 TOPS NPU, Wi-Fi 6 and HDMI 2.1 output up to 4K at 120fps.
Specifications of the Radxa ROCK 4D:
- SoC: Rockchip RK3576 (or industrial RK3576J), 4 x Cortex-A72 + 4 x Cortex-A53
- GPU: Arm Mali-G52 MC3
- NPU: 6 TOPS INT8 (also INT4, INT16, FP16, BF16, TF32)
- RAM: 2GB, 4GB, 8GB or 16GB LPDDR5
- Storage: 16MB SPI NOR flash, eMMC and UFS module interfaces, microSD slot
- Ethernet: 1 x Gigabit, PoE with an add-on HAT
- Wireless: Wi-Fi 6, Bluetooth 5.4, external antenna connector
- USB: 2 x USB 3.0 Type-A (one OTG), 2 x USB 2.0 Type-A, 1 x USB Type-C (power)
- Display: 1 x HDMI 2.1 (up to 4K@120fps), 1 x 4-lane MIPI DSI
- Camera: 1 x 4-lane MIPI CSI (or 2 x 2-lane), plus 1 x 2-lane MIPI CSI
- PCIe 2.1 x1 via FPC connector
- Audio: 3.5mm 4-pole jack (stereo out, mic in)
- 40-pin header with UART, SPI, I2C, I2S, PWM, CAN and more
- PWM fan header
- Power: USB Type-C or GPIO header
- Operating temperature: 0 to 60 degrees C (RK3576), -40 to 85 degrees C (RK3576J)
Official product page: radxa.com/products/rock4/4d
Radxa ROCK 4D from above
1200w (291KB) | 1920w (658KB) | original (6.7MB)
Radxa ROCK 4D from below
1200w (346KB) | 1920w (733KB) | original (4.9MB)