NVIDIA Jetson TX2 Developer Kit
The successor to the TX1 on the same Mini-ITX carrier, with a Pascal GPU, NVIDIA Denver 2 cores and twice the memory and storage.
Specifications of the NVIDIA Jetson TX2 Developer Kit:
- Jetson TX2 module: NVIDIA Pascal GPU with 256 CUDA cores
- CPU: dual-core NVIDIA Denver 2 64-bit + quad-core ARM Cortex-A57
- Memory: 8GB 128-bit LPDDR4
- Storage: 32GB eMMC 5.1, full-size SD card slot (UHS-1, up to SDR104), SATA connector with data and power
- 802.11ac Wi-Fi and Bluetooth (two antennas included), 10/100/1000BASE-T Ethernet
- USB: 1 x USB 3.0 Type A, 1 x USB 2.0 Micro-AB (for flashing and device mode)
- HDMI 2.0
- PCIe x4 slot (PCIe 2.0 x4 controller)
- M.2 Key E for wireless cards (PCIe x1, USB 2.0, UART, I2S, I2C)
- 40-pin expansion header
- Camera connector for up to six CSI-2 cameras (up to 12 with CSI-2 virtual channels); camera module included
- 4-pin 5V PWM fan header; module comes with a fan-cooled thermal solution
- Power, reset, force recovery and user-defined buttons
- Power: DC power jack, power supply included
- The carrier board also supports the Jetson TX2i, Jetson TX2 4GB and Jetson TX1 modules
- Carrier board size: Mini-ITX (170 x 170 mm)
Official product page: developer.nvidia.com/embedded/jetson-tx2-developer-kit
NVIDIA Jetson TX2 Developer Kit from above
1200w (469KB) | 1920w (1002KB) | original (5.6MB)
NVIDIA Jetson TX2 Developer Kit from below
1200w (358KB) | 1920w (823KB) | original (4.9MB)